Unboxing Robotech RPG Tactics

It finally arrived!  My wave 1 Robotech RPG Tactics Kickstarter pledge:




This is by far the largest box I've gotten for a kickstarter, and it's only the first wave.  While it had some space inside, there was still a lot to be found waiting within:



Once I got it all out it took up a pretty big area on my bed:



While I have another wave coming with a bunch of expansion stuff, this is definitely the lion's share.  This was a good buy, to be certain.  In the above pic you can see a couple of prints I got for adding on a Homecoming pledge onto my original Battlecry pledge.  Both pieces of art are ones that I like, and they were printed on semi-glossy paper that has a good feel to it.  They will look great on my geek-wall once I get them framed.  There's also the art print I got from my Battlecry pledge, and it is a great piece as well.  So much art!

Ok, let's take a look at the inside of the box:



That's not a site that I feel comfortable with.  It looks like the sprues were just placed in their haphazardly.  Considering the amount of shifting/turning that can occur during shipping this could become an issue.  That being said, my box arrived shrink-wrapped, and not a single piece was off the sprue, so my concern may be misplaced. 



The books and cards were undamaged, and on the bottom of the box, so they weren't affected by any shifting.  I haven't done a base count yet, but I should.  Normally I'm not as worried about bases as I have a good stock of pre-made bases as well as extras.  The bases for Robotech are different, so I'm going to have to manage what I have.  One problem I did notice was that the bag of RDF dice was open, and the dice had spilled all over the inside of the box.  At first I didn't think anything of it, but after counting I noticed that I was missing two, and one of them had an extra drop of plastic on it that must have been a manufacturing defect:



I've sent off a message to the Robotech Kickstarter as I imagine it's a simple fix.  So there's a lot of stuff in the main box, but I also got some extra stuff.  There was a plethora of additional/redundant models, which means my collection is going to be pretty awesome to start with:


\


The 76 base box of Robotech retails for about $100 USD, and comes with approx 40 miniatures.  The add-on for the kickstarter adds on another 36 miniatures in wave 1 alone (there's more to come in wave 2!).  One thing that I'd like to take a moment to point out, and congratulate, Ninja Division & Palladium books on is the inclusion of these:



Instructions!  Over the past four or five years miniatures companies have been making the switch to plastic.  Some companies like Reaper have left their plastics fairly simple, but plenty of others have gone more complex.  There's nothing wrong with having a complex assembly, but a lack of instructions can be very frustrating for many hobbyists.  I have seen many complaints on the lack of instructions included not just with kickstarters, but with plastic miniatures in general.  Companies are starting to get the message and rectify things, but I wanted to give a hearty, "Bravo!" to Palladium and Ninja Division for including these from the get go.

You may have noticed a couple additional add-ons on top of the main box.  I got these to either round out my forces (I'm liking the number four in the case of Robotech) or because I wanted to have a different loadout.  One case of this is the Artillery Battlepods:



  I got a group of four with the main box, and I have a feeling I'll try to magnatize the weapons, but I wanted the heavy particle cannon.  Originally it was going to be included as a bonus, so I picked up an extra set of artillery pods, but it turned out that they could fit it on the sprue so now everyone can have the joy of heavy Particle Projection Cannons!



Continuing with my need for groups of four I picked up an additional set of Destroids so I could field up to four Excalibers Tomahawks, and four Raider X's Defenders.  All that is left now is to trade my services for other Robotech miniatures to round out other groups of four as I need at least two more Spartans and two more Gladiators.

Happy Package

With the second wave of my Sedition Wars kickstarter supposedly hitting late June/early July I've been trawling through the Studio McVey forums.  A couple weeks ago I came across a thread where they were showing off some of the character sculpts from the upcoming expansion/stand alone game Arms of Sorrow.  AoS is compatible with Battle for Alabaster, but it is its own game as well.  Well, Mike McVey was going to have some resin sculpts at a miniatures convention called Salute (a wargaming convention held in the UK), and had let drop that people could send him a message to get some as he might have leftovers.  Even though Salute had come and gone by a couple of months I sent a message anyways.  He still had a few left and I was able to get my hands on them early!



Commandant Grist is the battle-hardened, Gnosis-suit wearing sculpt you see above.  It's a simple yet elegant sculpt.  A model like this with too many fiddly bits can become frustrating to paint as each of the smaller items ends up requiring its own attention, and it just begins to add exponential amounts of time the more little bits are on there.  Nice and simple but with plenty of variability to add more colors to keep things from becoming too boring.

While Grist is cool (and I am a big fan of robots/power armor/mecha), this next model is the one that really caught my eyes, ripped them out of my head, and held them against the screen.



Phaedrus Chiruge.  Oh my goodness!  Holding this model was incredible!  There is a level of complexity in this sculpt that pictures just can't do justice to.  I don't know that I've ever held a sculpt with such intricacies as this one.  There is a *LOT* of detail on this model, but unlike other, "detailed models," this one is a little different.  Rather than an amalgamation of bric-a-brac/equipment, the detailed bits are the same.  Muscles/tendons, ripped skin, carapace/plates, and so forth.  The details on this model will be consistent, which means less color swapping.  It'll still be time-consuming, and perhaps it's a personal opinion, but this kind of detailed model is one I take to rather easily.

Notice that guy in the background?  Yea, that's Lictalor Strongbow (well, that's the character's name, the mini itself is Arthal Nightblade from Reaper Miniatures).  I haven't glued either Phaedrus or Grist to their bases, and Lictalor is helping to keep Phaedrus on her feet.



Sedition Wars is done in 28mm scale, while Reaper Miniatures is done in 30mm. "Heroic Scale."  Heroic scale is about 32mm, but the two scales are close enough that they are practically interchangeable.  Scale can be pretty important as it helps to add to the overall illusion, lest your mighty ancient dragon the size of a mountain that has terrorized the kingdom for centuries stands only twice as tall as your character's minis.  Here's another size comparison:



In the background is my Drago (in need of arm repairs) to help give a better sense of scale overall.  Lictalor is standing on a 30mm base, while Phaedrus, Grist, and Drago are on 50mm bases.  Drago is standing right behind Lictalor, and you can see how much of a difference in scale there is.  I've worked in both scales before so I'm not worried, and am still rather excited to add more Sedition Wars to my collection.  I look forward to both the second wave (which has a lot of the exclusive miniatures), and seeing more for Arms of Sorrow.

First Glance At Robotech RPG Tactics

I had originally intended this post to go up early last week, but it seems that being in a car crash wasn't enough as I got sick shortly after my last post, and have only recently begun to recover.  So without further delay let's dig in to one of the exciting finds at Adepticon.



The nice gentlemen from Ninja Division are running a Kickstarter for Robotech: RPG Tactics.  The game uses iconic mecha from the classic anime series Robotech.  The above picture is one of the Veritechs/Valkyries painted up as squadron leader (fans of the series will recognize the paint scheme as belonging to that of Rick Hunter as leader of Vermillion Squad).  I got to spend some time talking to the great guys from Ninja Division, tried out a demo, and took plenty of pictures. 



The above pieces are what you would call prototypes.  They're all cast in pewter and made up as special demo crews for cons, and were painted by the talented John Cadice shortly before the con.  The final product is going to be cast in plastic, which in this case isn't a bad thing as the minis I got to hold all had some heft to them.  Plastic Robotech minis will be a lot more durable, especially the battlepods.  Speaking of Battlepods there were some special Battlepod promo minis given out each day to the first 100 people who came by at Adepticon.  While I was unable to grab one myself a friend of mine, hearing about my car accident, grabbed one for me.



Needless to say I was very happy about this find.  I currently have the guy assembled and standing on my desk waiting to be based, but haven't decided if I'm going to sculpt a blasted street or if I'll do more of a ruins.

I got a chance to play the demo itself, and it seems pretty straightforward.  You're either the Zentraedi or the UEDF (United Earth Defense Force), and you utilize a number of squads.





There was only a small selection of models for the demo.  The Zentraedi was all Gulag Battlepods while the UEDF had a squad of three veritechs and a pair of Tomahawk Destroids.



The Gulag Battlepods had a style/scheme that gave them the potential to have more Battlepods swarm onto the field at the end of each turn (replacing ones destroyed during the turn), unless you entirely destroyed that squadron.  The UEDF had smaller numbers, but packed a lot of firepower.  Interested in checking out the rules?  Well they've given a sneak peak at them!  PLEASE NOTE:  THESE RULES ARE *NOT* FINAL!!!  These are still a rough look at things, and the final product could differ wildly from what you read.

While you're reading the rules, how about a look at the Veritech in Gerwalk/Guardian mode as well as fighter mode?







I was VERY impressed with the detail.  They definitely caught the feel of the original designs in my opinion, and when cast in plastic should look just as good as what you see here.  For a, "quick and simple," paint job John Cadice really captured all the flavor of the series I remember growing up with.  One thing worth noting is that each Veritech has three forms: Fighter (Jet Fighter), Battloid (transformed), and gerwalk/guardian (legs and arms extended in Jet Fighter mode).  While switching between modes is simple (done when the squad activates), it does mean three models painted for one figure used in the game.  Given the overall durability and power, it may as well be three models in one.

For the demo we were given Squad Cards which had stats and traits for the squads used during the game.





Again please note: THESE ARE PROTOTYPES AND NOT FINAL VERSIONS!!!  Even though they're not necessarily the completed project they're very easy to read and follow.  I think the general format they use is very solid, and will help the game along.  You can see weapons and general stats occupying the left 2/3rds of the card while armor/life points occupy the right.  A quick look shows you that those Battlepods need swarm tactics with how easily they'll be shot out of the sky.

While there weren't any on the board there was a Defender Destroid that had been painted up and on display.




And for those of you interested in the recently unlocked Roy Fokker Veritech here's a sneak peak at what it may look like painted:



While it may look like the range of models is rather limited I'd like to remind my readers that these are the figures that were cast in pewter and set up as a quick demo crew before Adepticon.  The Kickstarter has already reached multiple stretch goals and unlocked:

Gnerl Fighters, Sentry Pod Upgrade, Mk. II Monster (YES!!!), Spartan & Phalanx Destroids,  Support Battlepods, and Zentraedi Male Power Armor!

The rumor goes (according to some guy with the initials K.N.) that anything from the Macross Saga is fair game to be a piece in the game.  I did ask about the limit, and so far the agreement between Ninja Division, Harmony Gold, and Palladium Games is for the Macross Saga.  However it stands to reason that if things do well enough we could see Southern Cross, New Generation (Genesis Climber Mospeada for you hardcore fans), and Sentinels!

However far this goes the prospects are already exciting!  I still have a few clinging details from the excitement of Adepticon to attend to, but soon I hope to get a post up about a painted promo Battlepod.